1968 Impala Fastback overhaul....er sorta.

[ImpinAintEasy]

Been talking about doing my 68 for quite a while now, Finally saved enough money to do what I wanted, hopefully this is the last time. For starters I got a 427 BBC, forged crank and pistons, shot peened stock rods with ARP bolts. A Erson Roller cam, Crane Roller Rockers, Edelbrock RPM Air Gap intake and a EZ EFI to top it off.

[ImpinAintEasy]

Next I had to modify some brackets, and oil pan, header flanges to fit the new motor in the car with the Small block mounts. I could have bought mounts but thats not the hillbilly way...and it would have raised my engine and center of gravity. So it made sense to modify. Custom alternator bracket for the passenger side. Keeps things equal side to side and down low.

[ImpinAintEasy]

And finally the frame. New 1 1/8" sway bar up front, 3/4" out back, new coil springs all the way around, New shocks all the way, I got adjustable upper control arms in the rear, boxed in lowers, an adjustable panhard bar and a 9" Strange rear axle with a 3:50 limited slip.

[hillbilly les]

Very nice,,,,,more pics.     More pics

[NCHKustoms]

Way awesome! Looks gooood!!  More pics!