Ok been Workin on this one for bout two months now guess not really Workin on it but whatever pulled the motor and trans getting it ready for the swap than ran outta money typical huh so used the motor i built for it and put it in my 84 Chev gonna pull it back out when it gets warmer ill keep everyone updated
Looks like a fun project. What kind of motor is going in it?
Its a 67 327 outta a corvette bored .60 over factory steel crank probe forged pistons and eagle h beam rods lol its in a giant piece of s*** lookin chevy right now lol
Quote from: 327 mustang on December 15, 2010, 09:52:09 AM
its in a giant piece of s*** lookin chevy right now lol
Aren't they all? ;)
Hmmm most of them lol
i like it already always thought that would be sweet to put a bowtie under the hood of a henry. *(chev in a ford)*
Should b fast wanna turbo it when i get a lil money here a picture of the motor in a 84 Chev pickup Truck need to b rewired take no notice off huge wire bundles lol
YES! Build thread!! Awesome! I cant wait to see this startin to be put together! Except the Chevy part.. haha. Should be a fun ride tho!! Keep us posted!
Ya should b way fun 327 gonna for sure b faster than the 4.6 lol
Isn't there some laws against cross breeding? ???
:lol:
Lol none will ever find out lol will sound just like a ford
Quote from: Krandall on December 16, 2010, 10:07:37 AM
Isn't there some laws against cross breeding? ???
:lol:
Says the guy from Pine County... :slap:
AND?
:wave:
#3 is a dorkkkkkkkkkkkkkkkkkkkkk : :wave:
No, that's me waving at you from a safe distance...
:thumbs:
Old pictures before motor put in red truck
i like the last pic! that things sweet!!
Ya decideing Wat to do which one to finish first
Gonna finish this first its so much nicer so the only set of small block in mustang headers is 700 bucks lol any one here no how to build some and can help me lol
XCar before i pulled motor cause couldn't afford headers lol
not familiar with cross braces in yer mustang,, will center dump or block hugger types work let us know
Nope that exactly where the crossmember is i thinking i gonna run a turbo so that should make this alot simpler
How 'bout straight up through the hood? Derby car style. Maybe even throw on some flappers? Everybody loves flappers.
O god amazing lol split each pipe into two so i can run 16 flappers lol. .....Ting ting ting ting lol
everybody,,,EVERYBODY likes noise :clap: :clap:
Not quit my style on a mustang lol
like on the bmw with 302 go forward and back under the A frame,,just thinin ,,be kool to see when finished
Quote from: hillbilly les on January 23, 2011, 03:37:26 PM
like on the bmw with 302 go forward and back under the A frame,,just thinin ,,be kool to see when finished
What he said! Check this out:
(http://2.bp.blogspot.com/_oQAJreOC07s/S_wR1n5to-I/AAAAAAAABlU/FonUbfAOzoA/s1600/gene_ex2.gif)
gawd that car is sweet ! nice moostang! idk how to make my own headers tho :P wouldbe a heck of alot cheaper! noise ftw~!
Decided gonna run a turbo should make headers easier i think
Just got a welding job so should b able to have it done by Broadway show yayness
work is over rated ,,but a good thing
Very good thing lol gettin 15 bucks starting lol
nice ,,local would be good :thumbs:
It is its right in Cambridge at a place called schlagel lol
i kinda wondered ,,seen the ad last week ,,by chance you werkin for a dude named rob<forman>??
Think so my gf brother work there and that his supervisor
ya ,,thats my brother ,i worked there years ago,,talk to rob ,,he has a couple of kool cars at home
Ok will do lol just happy can get some projects done so back to cars hey everyone i gonna run a turbo on the small block i putting in my mustang so i have a good hx35 off a cummins Wat y'all think to big or no?
should have plenty of boost, go faster juice :clap:
Dont need to b any faster lol Im already a teenager driving a mustang lol
He means the tires will spin faster doin a burnout :) haha
I cant wait to see this car! Soo Sweet! congrats on the job!!
Lol ya Didn't didnt think bout that gonna do the burnouts at Broadway
WOOO!! Atta BOY!!
If its done lol pulling the motor back outta the truck now drove it today and pUt cheap gas in it and it pinged pretty bad couple times hopefully didn't hurt a piston
nobody needs that,,takes drivin time away
Haven't pulled the heads yet but got the motor out and pulled the plugs and there a couple glittery ones
hope fer the best mister ,,there pretty tough
There probe forged pistons lol
So everything was ok lol haven't had much time lately i been Workin but gonna work on it this weekend lol trying to find a good set of heads and got my turbo rebuilt last weekend o and i figured out y my motor ran a lil crapty lol every exhaust valve hit the pistons lol like four were bent always New it had a lil miss lol
not to bad then ,,summers comin,,almost time fer a road trip
Where we gonna go lol
I heard rumor of possible end of march run to grantsburg
Lol sounds fun i wanna go lol but i dunno if my car will b done by than
na,, itll be sometime after that to the mug drive or somethin like that,,last run over there it was kold, but we had over 10 cars er so ,,it was a nice short run,,.later in the summer(spring) we might cruize to a drive in by siren,webster
Can i tag along lol or is it a club thing
you better come.. an well all do some smokeys!
Motors comin along tho! i havent touched nuttin in.... ah......looooooooong time :help:
Will do lol if i get my car done lol
yup .let us know when you get it done ,,like to look at it
Ok welll I trying to find a better set of heads before I do it and I need a mechanical secondary holley 850 if any one got any of these write on here
kinda quiet here,, hope yer findin your stuff to get it going,,,springs a comin :clap:
Nope can't find nothing i need
How goes the project?
Ok kinda lol havent touched it all winter gonna get on it here soon but gotta sell a talon I bought first
yer back,, long winter ,,we got a meeting friday 630 pizza pub to discuss the first cruize,, hope ya got something soon ,,, hot rods are comin out :clap:
got a 95 talon tsi I been drivin a lil might sell that to buy a 4.6 to put back in the stang but if I gonna do it gonna put a carb intake in it should b fun
sounds like fun ,,4.6 still a roller motor ,,,correct??????
There overhead cam tryin to find a dohc cobra one but not gonna happen lol
ya, seen a few ,,,but$$$$$$$$$$$$$$$$$ :jaw:
Way big money sellin that talonfor 15 ,just gonna continue with the sbc swap lol
still a nice swap though..still huntin for parts??????
Yup just 6onna do the sbc swap like I was planning so allllllllll I really need is a nice set of heads and a holley card like a 850 double pumper so if any body has either let me no
Before I tooked it apart lol
looks like a fun ride ,,nice wheels
Lol I no right it was fun gonna b funner now thou lol
some new pictures lol
sweet,, likin the color :thumbs:
sweeeeeeeeet, gona be a fun ride for sure! cant wait to see it on the road! :thumbs:
noice!!! Lookin good!
Wat I been working on lately lol
Hick ass jackstands lol
least ya ddnt say hillbilly.... :lol:
Crossmember before and after
nice fabrication ,gots to do mounts also? ???
Maybe might just buy the crossmember
Hopefully he motor works out this time instead of eating mains
looks like yer gittn there
Getting closer every second lol just broke lol crank with bearings ended up costing 250 after they had to grind it .040 on the mains and .060 on the rods. Which seems like a crazy lot lol
I think watci gonna do guys is cut the factory crossmember where i have to to get the headers to fit than take a bunch of pictures and get everyone opinion if the crossmember will still b strong enough
pics are good
Think I gonna run a turbo I got Latin around than no headers probs lol
10 4 looks like she's comin along quickly!!!
I got a lol more money and space since I working on it at my dads shop lol
looks like that shop is the size of texas :clap:
I love it lol works awesome for working on stuff lol getting a h1c Cummins turbo to put on it
Hmmm it'll fit lol
looks like a bit of work,,holy snikies :lol:
OMG it is
New turbo
thats for the chevy? the mustang???????? NICE :jaw:
No way?!!! What's the turby from?
good shape? Only thing I know is seeing the surface rust, make sure the bearings are good, I've heard horror stories of bearings going :help:
Its off my fathers Cummins lol he rebuilt it from ground up and went to a turbonetics and that's his old one worked perfect hopefully it spools at a decent rpm
Nice!!! Can you tune a turbo? If it doesn't spool at what you want. Can you just replace the fan thinger? (technical term... :lol: )
Well u can just spendy lol but f it it will work hopefully lol still b cool to have it sittin there lol open the hood and see a turbo Chevy lol
cross breeding :help:
:lol:
opening the hood of anything and seeing a turbo under the hood is SWEEEEET!!!!!!!!!!!!
Lol ya hopefully everyonelikes it
So today spent 300 on random bullcrap that not even gonna get me any closer to being done I hate it never gonna have it done by anything fun sucks :'(
New pics
OHHH! Is that a turbo i see??? NICE! Its getting there! Looks good!
Ya might as well throw ER on lol
That purple looks pretty sweet. And the gold valve covers go nicely with it. Sponsored by Crown... ???
Lol hmmm wats crown lol
whats crown??? hmmmmm crown is --> :thumbs:
Lol ya I need to figure out a Holley here really don't need much more than that
Purple and gold... ;)
(http://1.bp.blogspot.com/_Tni88oQhPWo/S3COSfKdeWI/AAAAAAAAASY/wjWs4aEJQaM/s400/CrownRoyal.jpg)
So your pretty much set! Tune tune tune!! :thumbs:
No as in I needs one lol
Ohhhhh, then i meant... swap meet swap meet swap meet!! :P
When is the next one
There is one at EJ's Bar and Grill Linwood Mn May 15th 7:00am.
Directions : Aprox 3 miles east from Hwy 65 on CR 22 (Viking Blvd)
I went last year, it was pretty cool. Lots of sweet stuff for cheap!
But I need it done by the 21st lol
That should give you a few days.. haha.
OR Word is there is one at the state fair grounds next weekend??? A buick swap meet? Probably carbs there.. BUT id look into it before making a trip down, just to make sure there actually is one. I just heard it on the streets, no hardcore evidence :P
I dunno lol I ordering a 400 dollar k member with mountsbfor my car
My dads new toy lol
wow ,looks like a nice ride ,,i like low :clap:
looks SWEEEEEEEEEEEEET!
YES!! Thats sweet!
Jezzz everyone likes that more than my car lol
Yeah, it's pretty cool. But I'd take the semi in the background. :lol:
well, i am a blue oval guy though..but bowties are good to :S
That's gonna be my driver in two weeks lol new job lol it a 87 359 Pete number 230 out of 359 lol
Hmm Its a sweet truck! I like looow, BUT! im going to have to say id like the mustang, sleeper :batman:
I i been looking on the turbo forums at one someone put a viper motor in now that's bad ass
so been tossing around a new idea but I need some help whoever is good at PhotoShop I got a couple pics for ya to help me out with if ur bored lol got a couple pictures can take better ones if needed when u see the pictures ubwill get the idea lol
different,,sure never seen one of those :lol:
Ya lol would b a lil big did a bunch of measurements and it would be 3 in to tall at the front of the motor but everything else would fit great
No such thing as too tall... :batman:
Just cut the hood like that Detroit chev lol
Screw it just gonna mount the motor back up with my motor plates and build headers
puttin it back in the stang again????? thats where it should be! :S
Ya and that's where its gonna stay finally I sick of being so undecided lol
drive baby drive :thumbs:
exactly---^ Drive!!!
Worked on it a lil today got pretty far
Holy motor mounts, :batman:.
Get it?--------------^
8)
Get wat lol motor mounts ain't gonna break lol guess wat guys I sittin at mercy getting crap cause I got flash burn
Ouch
had it ,,,it aint no fun
:'(
O ya it sucks lol gotta put ointment on my eyeballs lol
Dang, that sucks.... Shields are your friends! 8)
the welds look nice though :lol:
Lol thanks that's 045 gas shielded. Flux core wire lol me and my dad had to fix a broken lowboy and I got the welder all set up lol
:slap: ---> 8)
Always use protection... :batman:
Ya only get one set of peepers. And you might wanna save 'em to see that new baby grow up. :thumbs:
Ya she growning lol I love her so much lol lots o work sometimes thou
their job is to be a pain in the butt.. and it's only begun... :lol:
Just ask hillbilly les about that -^
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
Lol ya she awesome thou makes the greatest faces lol
yup ,,just what krandall said :batman: :batman:
ya still gotta find a carb ended up grabbing my Cummins intercooler and it will fit in my car perfect
what kinda carb you need?
750 850 Holley double pumper holleys are the easiest thing to make blow thru
Wanna go start working on the car but kinda putting off welding lol not in a huge hurry
Gotta get my hood painted lol
Got it running today lol
Nice!! how does it sound?? AND that turbo had better be hooked up... :batman:
Its gonna be soon after I go buy a hat
Making a hat outta a piece of 5 in exhaust and a piece of plate lol gonna look great
Whats a hat? ???
Carb hat lol bonnet whatever lol piece that goes on the carb instead of a air cleaner
So tonight just put a air cleaner on it and drove it around without the turbo hooked up drove great the like five miles I drove itblol turbo sounds sick
hey i like the idea of doing a turbo setup yourself pretty cool. I just have a feel questions for you. 1. how are u handling the extra fuel load when the car is under boost? 2. did you buy a carb setup for blow through apps or did you mod. one yours. 3. are going to run a blowoff valve to contol boost after the throttle blades close
Ya nodded my q jet to work running a 1g DSM bov and running a snow performance kit
I would really like to see your set up, a turbo would be fun! get that done for car craft and lets take a trip down!!
Hoping to drive it from Blaine to franny Friday lol but we will c
327,, can you cruize into pine city on the 25 ,,let me know ,,we we meet uptown and cruize in together maybe 900 ish,, unsure yet with time :lol:
Hmmmm most likely where would we meet Cambridge or something? I wanna get a good week driving it before I go on a cruise and have it break down lol
I would guess rally in Braham otherwise right off 35 in Rock Creek. Show's in Pine Town so can only assume somewhere in between there and Braham. Hope I can make it to see this turbo Mustang, even if it is Chevy powered... :P
Ya I could meet it brahm lol
kool ,we will do it ,,no one likes break downs but car guys take kare of each other on cruizes :rofl: :rofl:
Ya well hopefully don't break down lol
Kooool what about rock creek? either way, i wanna see!! and hear!!
Well getting my driveshaft made right now at the place that's doing it than gotta figure out where the tranny leaks from and a couple little thingi think I gonna try bringing it to the Anoka car show saturday
So problem got a like 120 bypasss regulator on my car and for some reason if I have the alternator or a battery charger on it it won't bypass enough fuel to keep the pressure down no if my return about 3\4 the size of my feed could that b causing my problen
other wise ,,its all workin???? be nice to check it out :thumbs:
Yup yup lol
Lol all done but every time builds boost blows gas our every hole in the carb looks like have to get a holley
ought a Holley and rebuilt it and now it runs kinda good but got it to franny with only one lil miss hap
nice,,get a 850 double??? least ya got it drivin 8)
No 650 double with a proform 750 main body
Thats sweet!!! I wanna turbo something!!
Lol lets do it
So I'm trying to find a wideband a/f gauge but can't find any cheap ones ugh
Quote from: NCHKustoms on June 12, 2011, 11:07:25 AM
Thats sweet!!! I wanna turbo something!!
Geo... :batman:
I always wanted to take a geo and put like a Subaru all wheel drive setup and motor in a geo lol
That would totally be a disgrace to Subaru. :lol:
I don't care would b cool lol
Quote from: 327 mustang on June 12, 2011, 11:40:56 AM
Lol lets do it
ok, my truck and twin turbo my granada. haha
a rear wheel drive v8 geo would be pretty sweet
Lol lets do it my car is getting more and more bad ass
hahahaha, ill have to find a turbo first, then let the madness begin
ur car is sick
Put about 200 miles on it in the last day lol
drive drive drive :clap: :clap: :clap:
Lol yup car show in Plymouth tonight I goin to lol
So hows the run under boost does it seem rich enough also what did u do to add extra fuel under boost
Works great leans out a lil on full throttle I have a wideband now and to supply enough fuel I made a boost referenced power valve there directions all over the internet on how to make holleys work
That's good you did your research I know there is a lot of info out there I was big into Turbo Carb stuff a few years back had a pair to4s and a roller 302 but never went anywhere with it its good to see you did congrads
Yup just saving up money to go get a holley jet kit so I can jet it ant it all tuned right
So r u guys taking 65 down to 50s or wat
on my end probably 35 on saterday ,,leaving about 6 oo am ,,lots of the hillbillys will be just north of the lienenkugle? stage on the grass area,, not far from the franenstieners i hear,, git down there look us up :clap: :clap:
Well I'll have to meet u guys on 35 somewhere on ur way down
leavin early????????? where you want to hook up???????? any where is good with me .. watchya drivin??
I drove my car but its acting up a lil its like a tire is loose but its not lol and there a couple people from the hillbillys here lol
Meet @ BP in Isanti at 6:30am
I'm already at the 50s lol gonna camp so I'll see u guys in the mornin
10-4 boss!!! Did you find the Hillbilly party? Word ont he street 1 block north of the Leine lodge is where they'll be.
I found em lol sat with Randy almost all day
So sittin at the 50s lol raining sucks ass so someone said something bout someone has a wideband whoever that is would be cool to see if I could use it for a couple days?
I need a job so bad lol if u guys got any body who is hiring or something let me know
Lol new job someday here
werkin or drivin???
Driving lol for my dad
bUrnout lol
Damn. Nicely done, Joey. :thumbs:
Looks pretty stellar with both sides going. Ain't no one wheel wonder biz. :clap:
SA-WEEEEEEEEEEEEEEET!
Lol I don't do one wheel biz yo!!!!!!! Lol wow can't believe I said that but ya its alot funner to drive now hooked up the snow performance water meth kit so I can actually do 15 pounds of boost without worring lol
He said meth. :lol:
:clap: :clap:
I saw this: http://www.innovatemotorsports.com/products/MTXL.php
May be a worth while investment. The guy that has the wideband, I don't think he'd "borrow" it out... when I see him, I'll ask though.
yep, those work slick!
So trying to get rid of the carb just can't get that crap right lol if anyone knows where I can get a tpi intake and maybe harness and comp that would be freaking awesome lol
So pulled the motor again today to redo a bunch of stuff kind getting old but whatever don't think it'll b back together for the 13 th but we will see
you will get it done.
any picks of the burn outs from farmboys party????
One of ur brother and a couple of ur exploded tire lol pulled the pan off my 327 and found failure all over in it lol couple people have told me it was detonating from being to lean and smoked every main bearing and wore the rear thrust surface right of the crank but yet it still got 60 psi of oil pressure till the I i pulled it out lol so freakin it going to pick up a 396 big block tonight I'll post a couple pics later lol
396 in the Mustang... ???
:thumbs: :clap:
Yup yup should do go burnouts lol
Big block and broken stuff lol and new turbo lol
Awesomeness
Alot of mock up and 1/4 plate motor plate and 5 in exhaust lol
Pics
Today progress
wow
Fills it pretty good so I need one of those sheets to fill out to join ur club
dang!
Lol If any of u no of some BBC parts laying around would be super helpful like a set of headers that got rusted collectors just good flanges and 4 in out off the flange
Hmmm, no one comes to mind right away, I'll put out some feelers and see what I can find.
awesome lol need alot of other stuff to but gonna have to but new ugh I hate being broke
like the motor mounts it super street style, not moving. plant that power!!! :thumbs:
Those bushing are for a truck transfer case lol I was sick of solid mounted Crap lol should be pretty powerful when its done lol :thumbs:
freakining crap want the car done for ur guyses show on the 10th so im giving the 396 to my motor building buddy for the crap to put a 350 I got laying around together with my bigger turbo so I can drive it the rest of the year and maybe over winter build something different. ugh but it looks so nice
just seen you want the sheet to fill out to be a member ,,, will get that out to ya soon ,, sorry fer the delay
No problemo lol
geez another new motor!! holy canoly! getterrrrrr din!
Well the thing is is I have like 10 small blocks Latin around so if I blow one up just bolt another in lol
Prove it. :batman: :lol:
Ok maybe ten was a over exaggeration more like three lol here the one going in it with its high performance stock cast stuff lol
Cast stuff FTW!!
Whoa on a roll lol
just a question,,, what about ford blue????????????? lol
Gotta make sure people know its a chev
:(
I thought inbreeding was only north of brook park... guess I was wrong..
:help:
:rofl:
Lol nice it looks good in there though
plan on turboing it right away, or just gonna leave it NA for now?
Nope big hx55 right away gonna build the stuff tommorrow
Gonna start it here soon lol
sa-weeet!
Just drove it to franny from Blaine and worked awesome never touched 190 used like no gas and ugh completely different than that crap 327 lol
nice,,,gonna have it at our show??? yes is the answer just so ya know :clap: :clap: :clap:
Ya in east st Paul buying a wideband pretty scary lol getting a free ass massage from my gf twitchy leg shaking the whole car
my fail of the day crap sucked but already fixed it
worked ok today lol still kinda weird power band need to get a btm cause my total timing at like 19 so it don't ping so it makes no power till in boost but it roasts em off at 30 when it starts to spool at like 3500 rpm lol
:clap:
freaking awesome, cant wait to see it @! the show!
ya it broke that piece of the carb hat off at 30 psi lol
So the stangs down with a crapty cracked head freakinin sucks
Should put a Ford motor back in it... (http://www.crownvic.net/ubbthreads/images/graemlins/default/Ford%20Flag.GIF)
:lol: That's what I told him on FB.. This dirty inbreeding stuff isn't workin out :lol:
lol wat Evs anyone got some Chevy heads layin around
Lol lt1 mustang yes lol gonna make some mounts this week than get a bunch of wiring figured out yay
got it in yet?? hows bout some pics :thumbs:
All my phone pictures are to big lol
is there a fuel pump hole on an lt1????
Nope gonna keep the fuel injection and run dual walbro pumps in tank gonna need 80 psi worth of fuel pressure
Another pic
should be pretty snappy,,ya think??
Should be there 300 horse before 15 pounds of boost lol
Gonna be putting my intake and distributor on the LT motor lol gonna be something new I think don't see many LT motors with normals dizzys lol
Ha never mind running fuel injection Ick I gotta make up my mind just got a hoist put up in my dads shop should help out a lil lol
Lol got a marine 454 chev should be put pretty sick in my car got all the marine crap chromoly pushrods steel crank forged piastons
where did you end up finding that thing at?!!
dude had it in a shed down by my work lol been sittin for ten years gonna do about 250 bux worth of work for him lol
wow,,what else to say 8)
does it turn over/ready to run, or blown up.. or whats the situation?
Was ready to run pulled the heads off to check and ita got huge domes so like 13-1 compression which wont work lol
You don't need to turbo a 454!!!!
Run the thing!!! :clap:
Well pulled it all the way,down and found out.it had a 427 crank in it so ok no big deal its a 427 but someone dumbass ran it with the 454 balancer and flywheel which are external balanced and 427 are internal so all the mains are freakined crank is junk and one piston the skirt was just beat away so : (
aww man ,,why do they do that,,git er done :batman:
I no stupid people so heres the current pics
Ford motor... :batman:
427 Tall deck, truck block? or 427 short deck, car block? Casting Numbers?
No its a 72 454 block its just got a 427 crank in it
Some progress lol
that thing looks MASSIVE in there! :clap:
if you were to guess. how many times has that front end been apart on it? :lol:
7 times lol I want someone to put it together for me this time though so it looks better
please leave this one in there... pleeeassseeee :'(
Looks good tho!
ps. you need tires
Lol planning on leaving it in there hey ryan once I get it all togther and driving what do I have to give ya for me to drive up there and have you help me put the front end back togther lol
New stuff shiny forged pistons
Keeping the heads stock or will the be ported/bigger valves?
Getting 2.19 1.88 stainless valves still waiting on those and mechanical springs and crap also getting 11/32 stem valves that are undercut while the stock was 3/8 and gonna do some gasket matching and clean the bowls up after cutting bigger valves than my bosses buddy up north got a flow bench and gonna give me some pointers gonna get a picture of the crank and rods before I send it out to get balanced and gonna get the block line honed after I get my studs put in
Quote from: 327 mustang on February 25, 2012, 12:17:08 AM
Lol planning on leaving it in there hey ryan once I get it all togther and driving what do I have to give ya for me to drive up there and have you help me put the front end back togther lol
Help put it together? Whaaa ya think im home all day ? Maybe we can swap the front end off that.. and put a Granada front end on it.. to make it fast of course :)
lol so another engine ha ha 6.0 chev
This one gonna stay? :D
Or run? ???
Or both?
Making mounts as we speak lol not gonna run motor plates this time lol should b able to make actual mounts
WAIT!! Take it out!! Put in a Honda Vtek!
Putting a Chevy in your Ford is a safety move. Slow down and live.
I've always thought doing that is sort of like Knowing (biblically) your mom. You are all excited that it fits in there, but the rest of the world is thinking you have sinned. :mad:
LMAO!! ^^
:jaw: :jaw: :clap: :clap: :clap: :clap:,,, signed,,,,hillbilly les
:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
ziiiiiiiiiiiiing!!!!!!!!!!!!!!!!!!!
I like this guy :lol:
Lol hard to be any slower than a Ford as long as it starts lol
Cobra.....Corvette
Ever watch pass time? Remember the Chevy powered Camaro against the Ford powered Camaro? HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAH :lol:
^boom. luvin this guy
Ford powerd chevys are saweet.. besides the chevy part..
Funny cause every Turbo 302 I have ever seen that was a stock block pretty much blew up around 7 800 HP they did a deal on car Kraft with a conpletly stock 4.8 short block with some nice heads and an intake and made over 1200 HP for over 100 dyno pulls find a stock Ford shortblock that will do that reliably I don't think I have ever even seen a modular motor anywhere near that
someone say Ford block w/ more than 800 HP?
http://www.youtube.com/watch?v=lSV83P0Vd9g
:clap:
The shortcomings of the 302 block as stated by 327 Mustang are correct. The stock 302 block (originally designed as a 221 cu in) will begin to split between the main webs and the cam when it is turbo-stressed to over 800 horse or so. Modern turbo/wastegate/electronics can easily squeeze 1500 horsepower out of a 302. That's why I prefer the 351W block. As Chevy Does, and Mopar, Ford offers stronger blocks with more bore capacity for racers. Anyone trying to crank 1000 horse into a stock small block anything is more of a rodeo clown than a racer.
I like to kid around and do the Chevy vs Ford rivalry game, but in truth there are some great engines out there of many styles and brands. Look in the Summit catalog and there is quite a selection of aftermarket blocks, main stud girdles, forged cranks, H-beam rods, etc. for Chevys. If they are bulletproof, who is Summit selling the hard parts to? Frankly, I've had Ford, Chevy and Mopar engines, and they all have their weak points. If it is American built (I prefer V8's) and rear wheel drive, I have no problem with it. My wife drives a Mazdaspeed3 that has almost 300 horse and weighs 2600 lbs. Front wheel or no front wheel drive, it will get to the next township in a real hurry.
And, don't tell anyone I admit this, but I can see why Chevy guys like to put a Chevy in a Ford. Who wants to be seen driving around in a Chevy?
Loved that video, Krandall! That's a 351W block....but probably aftermarket or Ford racing. 4.125" Bore X 4" stroke = 428" Nice! want one in my 51!
Quote from: OldMusher on April 24, 2012, 10:56:45 PM
I like to kid around and do the Chevy vs Ford rivalry game
The internet is serious business.
So bought a wideband and all the little crap to get my mustang good enough for car craft just gonna bring that lol I'm pretty excited lol got it kinda figured out yesterday kept backfiring after it built boost turns out fuel filter was clogged lol hmmmmm FAIL lol but still think its running a lil lean guess we will find out if I get it running good might run it on the dyno lol if it blows its only a small block but only got three weeks to get it all figured out
ha ha FORD FAIL!!!!!!!!!
only use for a ford block lol
Thats actually an awesome idea!
Lol right I need my hillbilly sticker for my car
Wow a bunch of stuff got deleted :'(
Working on it.
Had to move a bunch of websites last night last minute. Lost 4 days of posts.
Hoping to get the pictures back up tonight. :thumbs:
that was weird this topic was locked hmmmmm so ended up with a pretty sweet engine if anyone can tell me what it is ill give ya quarter and yup its going in the mustang.
no idear what that is.
maybe somethin import-esque
nope its gm lol
hrm...
looks slow.
:lol:
lol its an all aluminum 4.2l out of like an envoy/trail blazer i guess people say will be good to 4-500 hp with boost
holy canoli!!!!!!!
there only like 400 pounds its pretty sweet lol
whats stock HP unboosted?
and the 4-500 what kind of psi is that?
there 290hp stock and everyone is saying 12 pounds will do 450hp
In the mustang eh? For how long :lol: :popcorn:
Well put somethin in it and lets go do smokeys!
im gonna and hopefully by broadway show lol
:lol:
Is it a runner or?
knocked just needs a crank kit and a couple rods cleaned up